CELLOVIS 30 H
HEC (Hydroxyethyl Cellulose)
Application: Cellovis 30 H (Enzyme resistant type product) is medium viscosity hydroxyl ethyl cellulose ethers designed for use in a wide range of paint & coating applications. Easily dispersible in cold water.
Using Amount: Usage level depends on application.
Packing: 25 kg paper bags with PE inner. 20’FCL:14MT with pallets or 16MT without pallets.
Storage: 3 years under cool, dry conditions in original packaging away from heat sources. It is recommended to use the product in rotation on a first-in first-out basis.
Safety: Please refer to the Safety Data Sheet (SDS) for complete safety information.
CELLOVIS 100 H
HEC (Hydroxyethyl Cellulose)
Application: Cellovis 100 H (Enzyme resistant type product) is medium viscosity hydroxyl ethyl cellulose ethers designed for use in a wide range of paint & coating applications. Easily dispersible in cold water.
Using Amount: Usage level depends on application.
Packing: 25 kg paper bags with PE inner. 20’FCL:12MT with pallets or 14MT without pallets.
Storage: 3 years under cool, dry conditions in original packaging away from heat sources. It is recommended to use the product in rotation on a first-in first-out basis.
Safety: Please refer to the Safety Data Sheet (SDS) for complete safety information.
CELLOVIS 60 M
HPMC (Hydroxypropyl Methylcellulose)
Application: Cellovis 60M is modified grade and it’s multifunctional additive for gypsum, ready-mixes and dry-mix products. The water retention properties of cellulose additives increase open time and impart workability, lubricity, shrink and crack resistance, void reduction, and adhesion. In dry mix systems, this product can create fast dissolve and easy viscosity for reliable performance .
Using Amount: Usage level depends on application.
Packing: 25 kg bags.
Storage: Store in cool, dry and well ventilated place. Avoid contact with direct sunshine. Shelf life is 2 years in suitable storage conditions.
Safety: Please refer to the Safety Data Sheet (SDS) for complete safety information.
DXPOL R3
Redispersible Powder Polymer
Product Description:DXPOL R3 is a redispersible polymer powder produced by spray-drying special water-based emulsion, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms emulsion.
Storage Condition: Store it in a cool, dry place below 30°C and protected against humidity and pressing, since the goods is thermoplastic, storage time should not exceed six months.
Application range: Skim coat (Wall Putty), EIFS system mortar, Tile adhesive/ Tile joint filler
Key properties: Supply good flexibility, Increase adhesion strength, Improves workability, Reduce water absorption
Packaging:
A. Standard Packing: In 25kg paper bags inner with PE bags
B. Big Bag or other special packages are possible on request.
DXPOL N7
Redispersible Powder Polymer
Application: REPOL N7 can be used in mortar formulations where good flexibility/elasticity, recovery and thixotropic behavior is required.
Using Amount: Usage level depends on application.
Packing: Pallet with 18 paper bags, each 25 kg, also 500 or 1000 kg of big bags.
Storage: Packages must be stored in a dry and cool warehouse. Pallets must not be stacked on top of each other to avoid caking due to the thermoplasticity of the polymer. Packing must be closed well after usage for protection against humidity and caking. It has to be used within 9 months.
Safety: Please refer to the Safety Data Sheet (SDS) for complete safety information.
DXPOL N9
Redispersible Powder Polymer
Application:
- Tile Adhesives: Due to its strong adhesion properties, DXPOL N9 can be used for manufacturing of tile adhesives fullfilling C1 & C2 requirements.
- Repair Mortars: Having excellent adhesion properties, abrasion and water resistance, DXPOL N9 can be used between 1.0 – 2.0 % in repair mortar formulations.
Using Amount: Usage level depends on application.
Packing:
Pallet with 18 paper bags, each 25 kg, also 500 or 1000 kg of big bags.
Storage: Packages must be stored in a dry and cool warehouse. Pallets must not be stacked on top of each other to avoid caking due to the thermoplasticity of the polymer. Packing must be closed well after usage for protection against humidity and caking. It has to be used within 9 months.
Safety: Please refer to the Safety Data Sheet (SDS) for complete safety information.